MoPower UPS V2 designed for the Raspberry Pi MOPOWER-UPS-V2

MoPower UPS V2 designed for the Raspberry Pi MOPOWER-UPS-V2 - All Spectrum Electronics

MoPower UPS V2 designed for the Raspberry Pi *Currently unavailable. We don't know when or if this item will be back in stock.*
Model # MOPOWER-UPS-V2

$60.00

Click to enlarge

*Currently unavailable.*
*We don't know when or if this item will be back in stock.*

On hand stock is currently not available. We are able to do production runs of 50 or more units, or make custom engineering changes to your specifications on this item. Please contact us at the email address below.

Software, firmware and more information is available at: www.allspectrum.com/mopower/

Here is the second version of the popular MoPower UPS. We have taken the core of what made our original UPS popular and expanded it's capabilities and specifications. More then just a full featured UPS for the Raspberry Pi, the MoPower features a highly flexible design featuring highly configurable power control logic, which make it suitable for many projects. It has been used successfully in many scientific, industrial, automotive, and solar projects around the world.

Features include:

Up to 6 hours of backup time using common NIMH AA batteries (6 cells), greater backup time is available by using larger batteries or more cells.

"Wake On Event" feature allows startup or shutdown of your Pi based on any various inputs, such as input voltage levels or digital inputs. This is perfect for automotive computers and can be set to power on and off your Raspberry Pi based on engine running state with only one power input! Also useful in solar applications.

Built in 90% efficient 5v switch mode power supply for powering the Pi

Wide input voltage range, 12v to a 30v input, using common regulated or non regulated adapters

An automotive grade TVS (transcient voltage suppressor) protects your Pi from when used in a harse automotive power environment.

Full two way communications between UPS and Pi, including reporting of Vin and Vbatt levels.

Optional INA219 current sensor wired to the 5v power for the Pi. Monitor real time voltage, current and power consumed by your Pi!

Four 10-bit ADC INPUTS! And numerous other input and output pins user configurable

Watchdog timer! Auto reboots the Pi if it crashes!

Onboard buttons for easy shutdown/reboot, optional top mount button available and external buttons can be added easily.

Onboard RTC with timer based (Wake On Timer) power on/off capability, great for remote battery powered applications to conserve power.

NOTICE: This product is intended for use by experienced users. Batteries are dense sources of energy and must be handled properly. Users should be familiar with proper battery handling/use, general electronics design and safety. Improper use can pose hazards. Detailed information is available here.

Optional INA219 current sensor addon is available HERE. Note the INA219 option must be ordered at the same time as the UPS as it adds optional components to the PC board itself.

Thank you for your support.

Note: This product has not been tested against and may or may not meet various regulatory, emissions and safety regulations in your country. This item serves as a battery/power supply section of a computer and is not a complete product. Users should be familiar with the technical details of operating a Raspberry Pi and proper handing/use of batteries and general electronics safety. This item should be used by those experienced in the components and general design of the product. Safe use of this item is ultimately the users responsibility. Improper use can pose safety and fire hazards.

Please contact us with any questions or comments using the form at: Contact us or email mopower -at- allspectrum.com

Links to optional items of interest (NOT INCLUDED):

INA219 current sensor

Tenergy Premium AA 2500mAh NiMH batteries

Tenergy Premium C 5,000mAh NiMH Rechargeable Battery

Tenergy Premium 9V 200mAh NiMH Rechargeable Battery

Tenergy 9V 250mAh NiMH Rechargeable Battery

AC/DC ADAPTER 15V 12W 800MA, Switching, 2.1mm I.D. x 5.5mm O.D. PLUG, CENTER POSITIVE

BATTERY HOLDER FOR 6 x AA-CELL (WITH SNAP TERMINALS)

BATTERY HOLDER FOR 6 x C-CELL (WITH SNAP TERMINALS)

Available Options:
GPIO HEADER INSTALLED:

Current Reviews: 1

This product was added to our catalog on Monday 04 June, 2018.

*Currently unavailable. We don't know when or if this item will be back in stock.*

Customers who bought this product also purchased

GPS Navigation Module, VK-162, G-MOUSE, USB, UBLOX 7	Electronic LED Christmas Tree kit =FREE WITH $50 PRODUCT PURCHASE, MUST ADD TO CART=	SPARE PLUG 5.5 x 2.1mm
SPARE PLUG 5.0 x 2.1mm	2x16 (32 pin), Double Row Straight Header, .1 inch Center - .025 inch Square Pin, Gold, Comm Con Connectors	2x5 (10 pin), Double Row Straight Header, .1 inch Center - .025 inch Square Pin, Gold

On hand stock is currently not available. We are able to do production runs of 50 or more units, or make custom engineering changes to your specifications on this item. Please contact us at the email address below.

Contact Us