MoPower UPS designed for the Raspberry Pi ASSEMBLED AND TESTED MOPOWER-UPS-V1.00-ASSEMBLED-TESTED

MoPower UPS designed for the Raspberry Pi ASSEMBLED AND TESTED MOPOWER-UPS-V1.00-ASSEMBLED-TESTED - All Spectrum Electronics

MoPower UPS designed for the Raspberry Pi ASSEMBLED AND TESTED *Currently unavailable. We don't know when or if this item will be back in stock.*
Model # MOPOWER-UPS-V1.00-ASSEMBLED-TESTED

$55.00

Click to enlarge

*Currently unavailable.*
*We don't know when or if this item will be back in stock.*

Version 1 of the UPS is currently sold out. New Version 2 Hardware pre-order is available here

Please note this version is fully ASSEMBLED AND TESTED (note: batteries, battery holder, and P2 header is not included, battery snap is included). See below for options.

MoPowers UPSs shipping as of July 2017 include a new 5v output polyfuse rated at 2.0A (vs 1.1A on the older version). The battery input polyfuse has also been upgraded to 1.5A (24v limit). Starting Jan 2018 the micro-controller is directly soldered onto the PCB, the socket is omitted. Documentation will be updated shortly. See FAQ at http://www.allspectrum.com/mopower/ for more information.

Introducing a wide input range power supply and UPS for the Raspberry Pi! Backup time up to 6 hours on regular 6AA NIMH batteries (batteries or battery holder not included, kit comes with 9v snap input). Many user adjustable options, including voltage based on/off control, ideal for automotive use.

Current features include:

Up to 6 hours of backup time using common NIMH AA batteries (6 cells), greater backup time is available by using larger batteries or more cells.

"Wake On Event" feature allows startup or shutdown of your Pi based on any various inputs, such as input voltage levels or digital inputs. This is perfect for automotive computers and can be set to power on and off your Raspberry Pi based on engine running state with only one power input! Also useful in solar applications.

Built in efficient 5v switch mode power supply for powering the Pi

Wide input voltage range, 12v to a possible 30v input(when TVS removed), using common regulated or non regulated adapters

Full two way communications between UPS and Pi, including reporting of Vin and Vbatt levels.

Four 10-bit ADC INPUTS! And numerous other input and output pins user configurable

Watchdog timer! Auto reboots the Pi if it crashes!

Onboard button for easy shutdown/reboot, external buttons can be added easily.

Onboard RTC with timer based (Wake On Timer) power on/off capability, great for remote battery powered applications to conserve power.

Please see the current user manual below, or visit http://www.allspectrum.com/mopower/ for further information.

Please contact us with any questions or comments using the form at: Contact us or email mopower -at- allspectrum.com

Links to optional items of interest:

Tenergy Premium AA 2500mAh NiMH batteries

Tenergy Premium C 5,000mAh NiMH Rechargeable Battery

Tenergy Premium 9V 200mAh NiMH Rechargeable Battery

Tenergy 9V 250mAh NiMH Rechargeable Battery

AC/DC ADAPTER 15V 12W 800MA, Switching, 2.1mm I.D. x 5.5mm O.D. PLUG, CENTER POSITIVE

BATTERY HOLDER FOR 6 x AA-CELL (WITH SNAP TERMINALS)

BATTERY HOLDER FOR 6 x C-CELL (WITH SNAP TERMINALS)

Please make sure to select which battery charge current resistor you would like installed

Files:
Assembly and User Manual in PDF (MoPower UPS - User and Assembly Manual v1.00-12-13-2015.pdf)

Available Options:
Battery Charger Current:

This product was added to our catalog on Friday 03 June, 2016.

*Currently unavailable. We don't know when or if this item will be back in stock.*

Customers who bought this product also purchased

LEAD-FREE SOLDER Sn 99.3% - Cu 0.7% 0.04" 0.22lb.	Desoldering Braid, No-Clean Wick w/Anti-Static Bobbin, #4 Blue, Width .098" (2.5mm), Length 5 ft.	All Spectrum Electronics Resistor Color Code Reference Card ==FREE==
Tenergy Centura Ni-MH AA 2000mAh Low Self Discharge Rechargeable Battery, 4 PACK	Tenergy Centura NiMH 9V 200mAh Low Self Discharge Rechargeable Batteries, 2 per pack	BATTERY HOLDER FOR 8 x AA-CELL (WITH SNAP TERMINALS)

Version 1 of the UPS is currently sold out. New Version 2 Hardware pre-order is available here

Contact Us